Nvidia Corp. Computer Hardware 2 Manuel d'utilisateur télécharger pdf (Page 41)

Sync and Connection Status for the Genlock Server

Sync Status

Receiving - Green indicates that a sync pulse is present.

House - Green indicates that a signal is present at the BNC

connector

Timing - Indicates whether the timing is locked to the sync signal

Green: The timing is locked to the house sync.

Grey: The timing is locked to the internal V-Sync.

Red: The display is not synchronized to the timing signal

Stereo - Always green indicates that it is in sync with a timing signal.

Port Status

Out/Out is the normal indicator for the server device.

In/In indicates that the system is not selected as a server or client

and is not frame-lock enabled.

How To Set Up Frame

Lock

Set Up the Hardware

Daisy chain the graphics cards together using a standard CAT5 patch

cable plugged into the external RJ45 connector.

You can connect to any of the two RJ45 connectors located on

the G-Sync II card bracket.

Each connector automatically conﬁ gures itself as an input or

output after all the connections are made and one system is

conﬁ gured as a synchronization server. A ﬂ ashing green LED

indicates an input and a ﬂ ashing yellow LED indicates an output.

If there is no server assigned and connected, then both LEDs are

a steady green.



NVIDIA Quadro G-Sync II User Guide

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

Pas de commentaire

Nvidia Corp. Computer Hardware 2 Manuel d'utilisateur Page 41